Traxxas – Supporto per Telefono Trasmettitore TQi Cod. 6532

ACCESSORI

Istruzioni di istallazione inglese

Installing the mount on the TQi transmitter

1. Install the mount on the top handle of the transmitter. Rotate the
mount until it snaps into place. Secure with the knob (A).
Reconfiguring the mount for installation on the Āton transmitter

1. Remove the existing battery cover from the back of the transmitter.

2. Remove the mount base from the clamp assembly by removing the
top and bottom knobs, hex screws, and nuts (B).Note: During reassembly, replacethe hex screw in the bottom
knob with the longer 3x28mm hex screw included in the kit; retain and reuse all other fasteners.

3. Install the mount base on the mount arm using the top knob, screw, and nut. Install the new battery cover on the
mount arm using the bottom knob, the included 3x28mm hex screw, and nut (C). 4. Install the battery cover/mount
assembly on the transmitter and secure with the included 2.5x6mm cap screw (D).

TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
KC2566-R01 Rev 180208
T

Optional Traxxas